Configuring Office 365 Group Classification

group1

Recently Microsoft released the ability to create classifications for Office 365 groups that allow end users set.  For example, you can now set classifications such as: internal, confidential, external, secret, top secret, low, medium, high, etc..  Group classifications are new and I am not sure the full story of how these will be utilized moving forward.  There are enhancements coming around classification within the security and compliance center that I hope this will be able to tie into at at some point.

Here is some info on the current setup of group classification (as of 10/31/2016):

  • They don’t actually technically do anything yet…
  • They are not on by default
  • The choices can only be set via PowerShell
  • They currently don’t show anywhere else other than “edit group” via Outlook
  • You can only have 1 set of classifications for a tenant
  • If you change a classification value, it does NOT go back and update existing groups that were classified but the existing groups that were classified do not lose the classification
  • It takes some time for classification changes to be visible in the GUI
  • Don’t put spaces between the comma delimited values (i.e. “internal,external” NOT “internal, external”)
  • You can use spaces within comma eliminated values (i.e. “secret,top secret”)
  • I tested some special characters such as ? and ! and they worked
  • I am not aware of a classification limit, i did a test with 15 without an issue

Here is the description of the new property:

2016-10-30-16_07_07-start

Prerequisites:

NOTE: Version 1.1.143.0 of the Azure AD PowerShell module includes many changes to renew the existing MSOL PowerShell cmdets. Over time the existing MSOL cmdlets will be replaced. The new module is called “AzureAD.” So where e.g. an existing cmdlet was named “New-MSOLUser”, which adds a new user to the directory, the new cmdlet’s name is “New-AzureADUser.

My scripts below are using Version 1.1.143.0.  Azure AD PowerShell Module Version Release History


Steps to set values for Group Classification

1 – Connect to Azure AD via PowerShell

2 – Review if you have any MsolSettings currently configured in your tenant

3a – If you have settings returned it will look like this (properties subject to change over time)

group2

Run this command to set ClassificationList to a comma separated list of values that you want.  (In my example I included “Internal,External,Confidential”)

3b – If you have NO settings returned it will look like this a new template will need to be created

group3

Run this command to set ClassificationList to a comma separated list of values that you want.  (In my example I included “Internal,External,Confidential”)

4 – Review your updated settings; now Classification’s are available for Groups

2016-10-30-16_14_29-start

You will now see it through the GUI when editing a group and will have the ability to set it.

2016-10-30-16_19_20-new-notification

And once you set a classification it will be viewable.

2016-10-30-16_20_55-photos

You can also set a classification using the Set-UnifiedGroup and New-UnifiedGroup cmdlets.

 

Ignite 2016 Info and Thoughts on Announcements for SharePoint – OneDrive – Office 365

2016-09-28-14_49_22-ignite-sharepoint-onedrive-office-365-info

I put together a Microsoft Sway through my Concurrency tenant that wraps up all of the announcements and my thoughts from the collaboration space at Ignite 2016.  This includes info on everything I was able to attend and intake while here in Atlanta.  I used Microsoft Sway so I could continuously update the Sway throughout the conference and after the conference for future review.  My changes are made in real-time and it’s super easy to update.

Link to Sway

SharePoint Designer – Error: Could not save the list changes to the server

I was working with a client recently and tried to create a new form for a list within SharePoint Designer and received the unfriendly error:

Could not save the list changes to the server.

2016-09-22-14_27_48-https___partners-jci-com_sites_20163221517880_itimo

I had created list forms on this list before, so I began back tracking what has changed since I had created one on this list before.  One thing I did was change a set of Lookup columns within the list to point to new lists and removed the old lists where lookup columns used to point to.

When looking at the list columns I found the lookup column that didn’t have a list that it pointed to:

2016-09-22-14_31_28-start

When you go into the column you will see again there is no corresponding list for the lookup:

2016-09-22-14_31_53-change-column-internet-explorer

I deleted the old column and REFRESHED SharePoint Designer.  If you just try to create the form without refreshing you will receive the same error.

2016-09-22-14_41_20-microsoft-edge

Once I refreshed…Voila!

2016-09-22-14_38_56-https___partners-jci-com_sites_20163221517880_itimo

Hopefully if anyone else gets this error this post will be helpful!

 

Changing a site column or content type group to the _Hidden group

Content types and columns use Groups to organize them. These are used so things are easier to find as there are a lot of default columns and content types (600+ columns and 80+ content types). As you turn on more features you will continue to get other content types and columns added to your site for you to use. You can access the site column and site content type through the Site Settings page.

2016-08-16 13_23_11-Jump List for Mozilla Firefox


Once you go into either page you will see the information organized by Groups with a Show Groups drop down on the top right of the page to easily filter.

2016-08-16 13_25_25-Photos


What you WON’T see on either of these pages are a collection hidden content types and columns.  A good example is the overall Title column for the Item content type. This is a very crucial column that is used across many site content types. So if you change the Title column at the site level, it will cascade to all of your content types and lists that are using that column. I have worked with many clients that did not fully understand what they were updating when they did this so it’s fairly common to see a field like this renamed. If you go into the site columns page you will not see this column because it is part of the _Hidden group. If I go in through site content types -> Item -> Title column, you will see that the column exists in the _Hidden group.

2016-08-16 13_31_41-Start


To change the group of this column you can either select an existing group or create a new group.

2016-08-16 13_34_36-Start


Once you make your changes the column or content type that you changed will now be viewable under the site columns or site content types page in the group that you selected.

2016-08-16 13_36_55-Photos


Now what if you wanted to change this back or add a new column or content type to the _Hidden group? When you go back to the edit page you will see that under the Existing group drop down you don’t have the _Hidden option.

2016-08-16 13_38_29-Start


All you need to do is type “_Hidden” in the New group text box and it will move it into the _Hidden group and it will NOT create a new group.

2016-08-16 13_39_49-Start


Now when you go back to the site columns or site content types page you will no longer see what you moved to the _Hidden group.

2016-08-16 13_41_19-Photos

Speaking at Collab365 Global Conference and SharePoint Engage

I was lucky enough to be selected to speak at a few more upcoming events this year! Both events I will be speaking about Office 365 Groups.

Here are the details on the sessions that I will be giving


Office 365 Groups enable teams to work together by establishing a single identity in Office 365. Office 365 Groups are a new and modern solution for collaboration in Office 365. There is a lot of confusion on what Groups can do and should be used for. This session will be a deep dive into all things Office 365 Groups focusing on the technical aspects.

We will spend a large amount of this session demoing Office 365 Groups. This session will include demos of:

  • How to create, access, and navigate
  • What are the core things to do
  • How are they technically structured
  • What administration is available and how to do it
  • What extensibility options are there

I will also walk through the pros and cons of using Groups vs other collaboration options in Office 365. Groups are also one of the fastest changing solutions in Office 365, so this session will bring everyone up to speed on the most recent updates that Microsoft has rolled out and what innovations are next. By the end of the session you should have a better understanding of what Groups can do and if they are right for your enterprise right now or in the future!


Collab365 Global Conference

Collab365 Global Conference 2016

The events ran by the Collab365 team (Collaboris) have evolved into must-attend events. These are fully online events so you can join from anywhere! They are now running 3 events that span a global audience. The best part about these events is that they are FREE to all. That’s right, you can get all of this amazing SharePoint and Office 365 content for free. These events continue to grow and the community for Collab365 has over 38,000 members now. I have spoken at these events before and really look forward to this one.

Register Now for FREE!


SharePoint Engage

SharePoint Institute SharePoint Institute

SharePoint Engage is ran by the SharePoint Institue which is an organization dedicated to the advancement of professoinals through real-world SharePoint certificaiton. The SharePoint Institute’s goal is to provide a standard for SharePoint professionals to gauge their knowledge and distinguish their SharePoint expertise from others. This will be my first SP Engage event and I am very excited to join a great collection of speakers down in Raleigh. If you are able to make it and see me wandering around make sure to come on over and say hello! I really enjoy speaking at conferences like this os I can get to know all the great people in our community and learn more about what other people are doing with SharePoint and Office 365.

Register Now!